Quality Systems and RoHS
General
Elektrisola plants are certified according to several standards like ISO 9001, IATF 16949 etc. etc. and thus prove, that they meet customers requirements. Under Quality Certificates the most important of these certificates can be viewed.
Elektrisola products are approved by UL, too. The certificates or the link to the UL online certifications directory can be found under UL.
Additionally all plants certify, that our products meet environmental standards, emphasized by laboratory test results for most of our products. To view these, please go to RoHS and REACH.
Quality Certificates
Elektrisola Atesina,
Italy
Elektrisola Inc.,
USA
ISO 9001 Certificate
IATF 16949 Certificate
ISO 14001 Certificate
Elektrisola S.A. de C.V.,
Mexico
Elektrisola Hangzhou,
China
UL
Elektrisola products are UL approved. See by Elektrisola plant below or check at www.ul.com.
RoHS and REACH
Environmental Compatibility
Elektrisola enamelled copper wire products conform to the standards set forth in EU Directive 2002/95/EC, RoHS (Restriction of Hazardous Substances), EU Directive 2002/96/EC (Waste Electrical and Electronic Equipment) and EU Directive 2003/11/EC (Prohibition of PentaBDE & OctaBDE) and REACH (Registration, Evaluation and Authorization of Chemicals). Independent analysis is available for all RoHS regulated substances.
RoHS Conformance Certified by Plants
All Elektrisola plants certify, that their products meet the Restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) as specified in the EU directive 2002/95/EC, and the other aforementioned environmental standards.
The respective certificates can be viewed or downloaded here:
Laboratory Analysis Results by Enamel / Wire Types
Elektrisola Wire Types are subject to independent laboratory analysis for hazardous materials repeatedly. The test results prove the environmental compatibility of Elektrisola products.
The laboratory analysis results are composed of the results for the conductor material and the results for the base enamel, a top coat and a selfbonding varnish where applicable.
Conductor:
Cu (copper wire)- ITW (increased tension wire)
- HTW (high tension wire)
- XHTW (extra high tension wire)
- Cu/Ag (silver plated copper wire)
- Al (aluminum wire)
- CCA (copper clad aluminum wire)
- HTCCA (high tension copper clad aluminum wire)
- SHTW (super high tension bare wire)
- ICCA (increased copper clad aluminum bare wire)
- EHTW (extreme high tension bare wire)
- RCW (reinforced copper bare wire)
- CuNi10 (copper nickel alloy bare wire)
- CuSn (copper tin alloy bare wire)
- CuMg (copper magnesium alloy bare wire)
Base enamel:
- for P130, P155, P155b, P155p, Pg155, P180, Pv180, P190, P210, P230, G155, G155p, G170, G180 (polyurethane-based insulation varnish)
- for E180, A200 (polyesterimide-based insulation varnish)
- for I220 (polyamideimide-based insulation varnish)
- for ML240 (polyimide-based insulation varnish)
Top coat:
- for PN155, PN15p, PN180, EN180 (polyamide-based insulation varnish)
- for AI210 (polyamideimide-based insulation varnish)
Selfbonding enamel:
- for AB-, BB-, CB and DB-series (butybond selfbonding varnish)
- for CS-, DS-,ES-, FS-, HS-, IS-, KS-, MS-, OS- and PS-series (solabond selfbonding varnish)
- for BE-, ET-, GT-, HT-, KT-, LT-, OT-, QT-, RT-, ST-, TT- and VT-series (thermobond selfbonding varnish)
REACH Correspondance Certified by Plants
Although enamelled wire is not required to be listed by REACH, the European Community Regulation on chemicals and their safe use, all Elektrisola plants certify, that their enamelled wire products contain less than 0.1% of the Substances of Very High Concern (SVHC) published by ECHA, the European Chemical Agency.
The respective certificates can be viewed or downloaded here: